top of page
JRH Engineering | Civil | Structural | Land Development
CASE STUDIES

Metal Building Foundation Design in Montgomery, TX

Montgomery · Montgomery County · Texas

Structural Engineering

Metal Building Foundation Design in Montgomery, TX

A foundation matched to a manufacturer's frame, across a 120-foot building

JRH Engineering designed the foundation for a pre-engineered metal building in Montgomery, Montgomery County, Texas, about 120 by 70 feet. The manufacturer supplied the frame and its anchor bolt locations. JRH designed the slab, grade beams, and anchor bolt layout to match them, and delivered sealed plans for the client to submit to the City of Montgomery.

AT A GLANCE

Project facts

  • Project type: metal building foundation, structural engineering

  • Location: Montgomery, Montgomery County, Texas

  • Building size: about 120 by 70 feet (about 8,400 SF)

  • Building use: [to be confirmed]

  • Plans issued: December 2025

  • Client: confidential

Foundation design

  • 6-inch, 3,500 psi concrete slab with #5 bars at 12 inches each way

  • Reinforced grade beams with stirrups at the perimeter and interior lines

  • Foundation set at least 1 foot below final grade

  • Six 20-foot column bays along the length of the building

Anchor bolt coordination

  • Anchor bolts and embedments laid out to match the manufacturer's drawings

  • Bolt diameters to be verified with the metal building supplier before concrete is placed

The Challenge: a long frame and a fixed bolt pattern

A pre-engineered metal building arrives with its own frame, loads, and anchor bolt pattern. At 120 feet with 20-foot column bays, the foundation has to line up with that pattern along the whole length, because a mismatch is costly to fix once the concrete is poured.

JRH's Approach: design around the manufacturer's frame

JRH designed the foundation independently around the manufacturer's loads and bolt layout. The slab and grade beams carry the building into the soil, and the anchor bolt layout follows the supplier's drawings. The plans flag bolt diameters to be confirmed with the metal building supplier before concrete placement.

The Results

01

Sealed foundation plans for a 120 by 70 foot metal building, issued December 2025

02

Anchor bolt layout matched to the manufacturer's frame

03

A foundation design the client's contractor can submit for permit

04

SERVICE

Have a site like this?

Tell us the constraint. We will tell you what it takes to permit it.

FREE CONSULTATION

Let's talk about your upcoming project.

Frequently Asked Questions

What did JRH Engineering design for the metal building in Montgomery, TX?

JRH Engineering designed the foundation for a pre-engineered metal building of about 120 by 70 feet: a 6-inch slab, reinforced grade beams, and the anchor bolt layout.

Who designed the metal building's frame?

The manufacturer supplied the frame and its anchor bolt locations. JRH Engineering designed the foundation to match them.

Why does a metal building foundation have to match the manufacturer's anchor bolt plan?

The frame's columns bolt to the foundation at fixed locations, so the manufacturer's bolt pattern and column loads drive the foundation design.

bottom of page