top of page
JRH Engineering | Civil | Structural | Land Development
CASE STUDIES

Steel Building Frame and Foundation Design in Lucas, TX

Lucas · Collin County · Texas

Structural Engineering

Steel-framed building with metal panel roof and walls in Lucas, Texas

One engineer for the steel frame and the foundation

JRH Engineering designed the structure and the foundation for a steel-framed building in Lucas, Collin County, Texas, about 50 by 30 feet. There was no manufacturer's package, so JRH designed the steel frame, the roof and wall framing, and the drilled pier foundation as one system, and delivered sealed plans for the client to submit to the City of Lucas.

AT A GLANCE

Project facts

  • Project type: custom steel building, structural engineering

  • Location: Lucas, Collin County, Texas

  • Building size: about 50 by 30 feet (about 1,500 SF)

  • Building use: [to be confirmed]

  • Plans issued: December 2025

  • Client: confidential

Steel frame and foundation

  • Wide-flange steel rafters and steel tube members

  • Cold-formed steel purlins and girts

  • Metal roof and wall panels

  • Galvanized exterior steel, with connection details at the rafters and columns

  • Drilled concrete piers under the frame, with a concrete foundation sized to the frame's loads

The Challenge: no manufacturer's package

When a building isn't a manufacturer's package, no one has engineered the frame. Someone has to design the members, the connections, and the foundation so they work together.

JRH's Approach: design the frame and the foundation together

JRH sized the steel members and connections and then designed the drilled pier foundation to carry the frame's loads. Doing both in one set of plans meant the base details and the steel details were drawn to match.

The Results

01

Sealed plans for the steel frame and foundation of a 50 by 30 foot building, issued December 2025

02

Frame, connections, and foundation designed to work as one system

03

A single plan set the client's contractor can submit for permit

04

SERVICE

Have a site like this?

Tell us the constraint. We will tell you what it takes to permit it.

FREE CONSULTATION

Let's talk about your upcoming project.

Frequently Asked Questions

What did JRH Engineering design for the steel building in Lucas, TX?

JRH Engineering designed the steel frame, the roof and wall framing, and the drilled pier foundation for a building of about 50 by 30 feet.

Why did JRH Engineering design the frame as well as the foundation?

There was no manufacturer's package. When no one else has engineered the frame, JRH Engineering designs the members, connections, and foundation together.

What is the difference between foundation-only and frame-plus-foundation design?

Foundation-only design matches a manufacturer's engineered frame. Frame-plus-foundation design means JRH Engineering also designs the steel members and connections.

bottom of page